How to apply eccentric reducer？

　　The two ends of the eccentric reducer have different diameters, which are used to connect different diameter pipes or flanges for reducing. Both ends of the eccentric reducer have the same center on the same axis. When the reducer is changed, if the position of the pipe is calculated based on the axis, the position of the pipe will not change. It is generally used for reducing the diameter of gas or vertical liquid pipe Both ends of the eccentric reducer are circumferentially cut, which is generally used for horizontal liquid pipeline.

　　When the cut point of the eccentric reducer is upward, it is called top flat installation, which is generally used at the pump inlet to facilitate the exhaust. The cut point downward becomes bottom flat installation, which is generally used for the installation of the regulating valve, and the use of exhaust. Stainless Steel Hygienic Welded Concentric Reducer is beneficial to the flow of fluid, and it has less interference to the flow state when changing the diameter. Therefore, concentric reducer is used to change the diameter of gas and vertical flow liquid pipeline. Since one side of the eccentric reducer is flat, which is convenient for exhaust or liquid discharge, and is convenient for start-up and maintenance, the eccentric reducer is generally used for horizontally installed liquid pipes.