Introduction of Main Types of Stainless Steel Elbows

　　Stainless steel elbows are resistant to weak corrosive media such as air, steam, water and chemical corrosive media such as acid, alkali and salt. Also known as stainless acid-resistant steel. In practical application, steel resistant to weak corrosion medium is often called stainless steel stamping elbow, while steel resistant to chemical corrosion medium is called acid-resistant steel. Because of the difference in chemical composition, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The chromium-containing stainless steel elbow also integrates mechanical strength and high extensibility.Stainless steel elbow is easy to process and manufacture parts, and can meet the needs of architects and structural designers.

　　The main types of 45 Degree SCH40 316L Stainless Steel Elbow are introduced.

　　1. Stainless steel elbow pipe fittings with variable wall thickness refer to the change of wall thickness along the length direction of the pipe.

　　2. Stainless steel elbow with variable diameter reduces the diameter of the finger end or part of the pipe.

　　3. Pipe fittings with flanges, the former refers to the end of the pipe convex to the inside or outside, the latter refers to the pipe fittings which form a bulge or groove in the circumferential direction of the pipe;

　　4. Stainless steel elbow bending pipe fittings, we contact more, that is, the straight pipe into different curvature radius elbow, such as elbow, elbow and so on;

　　6. Stainless steel pipe fittings elbow with crimping and bottom sealing, which increase the total strength of the pipe end to the outside or inside of the pipe or to seal the end of the pipe;