Bending resistance of stainless steel elbows

　　Stainless steel elbow processing relies on the power of conventional or special stamping device, so that the sheet metal can directly bear the deformation force and deformation in the die, thus obtaining the production skills of commodity parts with certain shape, size and function. Sheet metal, die and its device are the three elements of stamping. Because the stainless steel elbow has the advantages of inner wall lubrication, low resistance to heat medium activity, acid and alkali resistance, long service life, convenient installation and so on.

　　The 316L sch10s long radius 90 Degree 1.5d Seamless Stainless Steel Elbow has an inner lining at the pipe orifice. One part of the inner lining is located in the pipe orifice, which is fixed to the wide inner wall. The other part of the inner lining is located outside the pipe orifice. The inner lining of the product located outside the pipe orifice is provided with a cut. When the stainless steel elbow is connected with the stainless steel pipe, it is easy to butt and install. It can eliminate the tension produced by the pipe connection and has strong deformation resistance. After welding, the joint will not be deformed after a long time of use, and the installation decoration effect is good.

　　Stainless steel elbow, involving the field of architectural decoration, its technical points are includes a curved bending section and a straight section connected at both ends of the bending section, and also includes an arc bending section. The two ends of the product bending section are connected through the bending section, and the two parts form a hollow. Through the setting of bending parts, the bending resistance of stainless steel elbows is enhanced, and the service life of stainless steel elbows is also increased.